Magnetoresistive
Element Type
Proximity Switch
This is a magnetically driven type proximity switch which uses a magneto resistive element.
Outline
This is a proximity switch that operates by magnetic force. The simple drive method realizes low cost.
The operating distance can be set by magnetic force with this proximity switch, and custom-made products are also available, such as changing the length of the wires, or the terminal processing, etc.
Features
- - Adopted a magneto resistive element
- - Magnet drive type
- - Can be semi-permanently by semiconductor output
- - Built-in surge absorbing circuit and power supply polarity protection circuit
- - Operating distance can be set by a magnet
Specification
* Adobe Reader is required to open a PDF file.
| Specification | JME-001NON-F2 | JME-101NON-F2 | |
|---|---|---|---|
| Configuration | Cylindrical type | Square *1 | |
| Power supply voltage | DC10V～30V *2 | DC10V～30V *2 | |
| NO (Normally open) type | NON－F2 | NON－F2 | |
| NC (Normally closed) type | － | NCN－T2 | |
| Standard operating distance | 10mm | ||
| Set distance | 0～6mm | ||
| Hysteresis | 0.5 mm or less | ||
| Standard detection object | JM－102 | JM－104 | |
| Operating distance | Product variation | Less than ±2 mm of standard operating distance | |
| Temperature characteristics | - Temperature range from -20 to 70 º C, less than ±20% at 20 ºC | ||
| Voltage characteristics | Voltage range from DC10V to 30V, less than ±20% at 20V | ||
| Case Material | Case: Heat-resistant ABS Thread portion: SPCC |
Heat resistance: ABS | |
| Common Specifications | |||
|---|---|---|---|
| Output method | NPN open collector | ||
| Output power supply voltage | DC5～10V | DC10～30V | |
| Current consumption | 7mA(5V) 14mA(10V) |
7mA(12V) 14mA(24V) |
|
| Maximum output current | 100mA(5V) 200mA(10V) |
100mA(12V) 200mA(24V) |
|
| Residual voltage | 0.6V or less | ||
| Operation configuration | NO When detection object approaches Load ON NC When detection object approaches Load OFF |
||
| Display method | NO When detection object approaches LED lighting NC When detection object approaches LED turning off |
||
| Maximum switching frequency | 1000Hz | ||
| Insulation resistance | 100MΩ or more | ||
| Withstand voltage | AC1500Vrms / For 1 minute | ||
| Operating temperature range | -20～70℃ | ||
| RoHS compliant | ○ | ||
*1 The detection surface of the square type changes according to the operation method (Front F / Top T).
*2 A power supply voltage of DC5 to 10V type is also available. The "1" at the end of the model number (Ex.: JME-001 NON-F1)
