Single-phase AC Power Controller (IP1 Series)
This is a compact power controller with high density packaging which provides a diversified range of optimal AC control.
The IP1 Series is a compact power controller with high density packaging that realized low cost. This controller performs ON/OFF control by a digital input signal, and cycle and phase control by analog input signal and external volume. It provides a diversified range of optimal AC control.
- - Slim body with a 21.5mm width (Outer dimensions are common to the 15A / 25A type)
- - Built-in output protection component minimizes malfunctions and failures caused by external surges
- - Lineup consists of ON/OFF Control (IP1-S type), Cycle Control (IP1-C) and Phase Control (IP1-PW)
- - Notifies failures on the output side by LED and an alarm signal (IP1-S type)
International Safety Standards: UL and C-UL certified product
*To open PDF files, AdobeReader is required.
|Control method||ON/OFF control||Cycle control||Phase control|
|Maximum input voltage||DC 30V||–|
|The maximum input current||–||DC24ｍA|
|Maximum load and power supply voltage||AC 264Vrms|
|Maximum load current||15Arms||25Arms||15Arms||25Arms||15Arms||25Arms|
|1-cycle of surge current||146A(50Hz)||250A(50Hz)||146A(50Hz)||250A(50Hz)||146A(50Hz)||250A(50Hz)|
|Insulation resistance||100MΩ or less (DC500V)|
|Withstand voltage||AC2500Vrms /1minutes|
|Operating ambient temperature||-20 to +60 ºC (No freezing or condensation)|
|Storage temperature||-30 to +70 ºC (No freezing or condensation)|
|International Standards||UL and C-UL certified product|