Remote Monitoring System (EneSEE)
This system allows to remotely monitor electric leakage, electric power usage, and electric generating capacity visualizing by using numerical value and graphs for 24 hours.
Overview
What's EneSEE?
Jel System's new product "EneSEE" is not only in correspondence with revised Energy Conservation Law, but also with management of the electrical equipment of the facility and Remote Monitoring System that provides energy saving and cost management, through power consumption and power generation measurement function and monitoring, as well as control functions of cost reduction demand. With all these, we will comprehensively reduce energy and management costs for our customers.
4 Monitoring Functions
Insulation Monitoring
Possible electric leakage or transformer temperature monitoring of up to four systems in one terminal, announcements are sent by e-mail in real-time at the time of the alarm or when power outage occurs.
Demand Monitoring
The demand power is monitored 24 hours and announcements are sent by e-mail before the target power set by predicted demand calculation is exceeded.
Power Monitoring
It is possible to check on your computer or a smartphone in a form of graph or a table the power usage of up to four systems in one terminal that is monitored and measured 24 hours. In addition, it can also be displayed by summing a number of terminals and lines.
Power Generation Monitoring
It is possible to measure up to four lines in one terminal of solar power. It can display multiple devices and system collectively, and you can check with your PC or smartphone device as well as electric power monitoring.
Features
- ・Simple remote monitoring from your personal computer or a smartphone.
- ・It is possible to display sum of the plurality of channels, they can be easily viewed by the floor or by the whole building.
Specifications
*To open PDF files, Adobe Reader is required.
Item | Insulation Monitoring | Demand Monitoring | Power Monitoring | Power Generation Monitoring | HEMS Corresponding Power Monitoring Equipment | |
---|---|---|---|---|---|---|
Communication | 3G | J-RMZ3-N3G | J-RMD3-N3G | J-RMP3-N3G | J-RMS3-N3G | - |
PHS | J-RMZ3-WIL1 | J-RMD3-WIL1 | J-RMP3-WIL1 | J-RMS3-WIL1 | - | |
LAN | - | J-RMD3-LANW(Wire) J-RMD3-WLNA(Radio) |
J-RMP3-WLNA(Radio) J-RMP3-LANW(Wire) |
J-RMS3-LANW(Wire) J-RMS3-WLNA(Radio) |
J-RMH3-LAX01 | |
Analog Input | 8(Electric Leak 4 + Temperature 4) Electric Leak 20-1000mA Temperature 0-100℃ |
- | - | 4(Volage Range4) | 2(CT 2 System) | |
Digital Input | - | 4(Demand input for one point.) | 4(General- purpose input / Pulse input) | |||
Digital Output | 4(No-voltage contact) | |||||
Power Failure Detection | 1sec or more | - | ||||
Regularly Send Data | 1 time /day | 1 time /30min | ||||
Abnormality Notification | Decision time 0.1sec or more | |||||
E-mail of Recovery | Decision time 0.1sec or more | |||||
E-mail of Test Button | Test SW pressing time | |||||
Rated Supply Voltage | AC100~240V | |||||
Power Consumption | 5VA or less | |||||
Operating Temperature | -20~60℃ (Dewfall) | |||||
External Dimensions | (W)212×(D)163×(H)45mm | |||||
Mass | About 800g (Only the body) |
- > SSR
- > Diode Module
- > Thyristor Module
- > AC Power Controller
- > Sensor
- > Crystal Device
- > Energy & Cost Saving Products
- Electronic Breaker
- Energy Saving Lighting Series
- Rationalization of Fluorescent Lamp
- Mercury Lamp Alternative Lighting
- Remote Supervision System
- Air Conditioner Control System (Jel-Con)
- Substation Equipment Renewal Services
- JEL Security Camera